-40%
Junior Residential Garage Door Adjustable Top Roller Bracket

Junior Residential Garage Door Adjustable Top Roller Bracket

$ 8.73

Availability: 100 in stock
  • Item must be returned within: 30 Days
  • Refund will be given as: Money Back
  • MPN: Does Not Apply
  • Material: Steel
  • Return shipping will be paid by: Buyer
  • Condition: New
  • Type: Roller
  • All returns accepted: Returns Accepted
  • Brand: Unbranded

    Description

    Junior Residential Garage Door Adjustable Top Roller Bracket
    See our other items
    Residential Top Roller Bracket
    Adjustable residential top bracket made in the USA out of galvanized steel. For use on the top inside corners, right and left sides, of the top section of any type residential overhead garage door. This bracket moves the top section either forward or back to align the top section to fit tight against the door jam. Takes a standard 2" or 3" roller.
    Includes:
    Bracket
    Hardware
    Features:
    Top quality galvanized steel.
    Made in U.S.A.
    Assorted bracket hole combinations.
    Adjustable (3/8" to 7/8" and 1-7/8" to 3-3/16") top roller carrying fixture.
    Specifications:
    3 1/2" long
    2 1/2" wide.
    12 Gauge Galvanized Steel
    Compatibility
    Compatible with:
    All residential overhead garage doors
    Instructions
    Instructions for replacing: Hinge, Roller, Top Roller Fixture
    Lower door to "closed" or "down" position and lock.
    Remove one hinge, one top roller fixture or roller (except bottom roller) and replace, inserting the roller in the track before fastening the hinge or top roller fixture. Replace ONLY ONE hinge or top roller carrier at a time. See the figure below for the proper position of the numbered hinges and the top roller fixtures. Do NOT unlock or attempt to raise the door until ALL hinges, top roller fixtures, and rollers are installed.
    It may be necessary to change the position of the top roller fixture to assure a tight fit of the top section. Slide the top roller fixture up or down and drill new bolt holes in order to adjust the top section against the jambs.
    Do not stand under the door at any time.
    Residential Top Roller Bracket Adjustable residential top bracket made in the USA out of galvanized steel. For use on the top inside corners, right and left sides, of the top section of any type residential overhead garage door. This bracket moves the top section either forward or back to align the top section to fit tight against the door jam. Takes a standard 2" or 3" roller. Includes: ---Bracket ---Hardware Features: ---Top quality galvanized steel. ---Made in U.S.A. ---Assorted bracket hole combinations. ---Adjustable (3/8" to 7/8" and 1-7/8" to 3-3/16") top roller carrying fixture. Specifications: ---3 1/2" long ---2 1/2" wide. ---12 Gauge Galvanized Steel Compatibility Compatible with: ---All residential overhead garage doors Instructions Instructions for replacing: Hinge, Roller, Top Roller Fixture 1--Lower door to "closed" or "down" position and lock. 2--Remove one hinge, one top roller fixture or roller (except bottom roller) and replace, inserting the roller in the track before fastening the hinge or top roller fixture. Replace ONLY ONE hinge or top roller carrier at a time. See the figure below for the proper position of the numbered hinges and the top roller fixtures. Do NOT unlock or attempt to raise the door until ALL hinges, top roller fixtures, and rollers are installed. 3--It may be necessary to change the position of the top roller fixture to assure a tight fit of the top section. Slide the top roller fixture up or down and drill new bolt holes in order to adjust the top section against the jambs. 4--Do not stand under the door at any time.
    Junior Residential Garage Door Adjustable Top Roller Bracket
    Residential Top Roller Bracket
    Adjustable residential top bracket made in the USA out of galvanized steel. For use on the top inside corners, right and left sides, of the top section of any type residential overhead garage door. This bracket moves the top section either forward or back to align the top section to fit tight against the door jam. Takes a standard 2" or 3" roller.
    Includes:
    Bracket
    Hardware
    Features:
    Top quality galvanized steel.
    Made in U.S.A.
    Assorted bracket hole combinations.
    Adjustable (3/8" to 7/8" and 1-7/8" to 3-3/16") top roller carrying fixture.
    Specifications:
    3 1/2" long
    2 1/2" wide.
    12 Gauge Galvanized Steel
    Compatibility
    Compatible with:
    All residential overhead garage doors
    Instructions
    Instructions for replacing: Hinge, Roller, Top Roller Fixture
    Lower door to "closed" or "down" position and lock.
    Remove one hinge, one top roller fixture or roller (except bottom roller) and replace, inserting the roller in the track before fastening the hinge or top roller fixture. Replace ONLY ONE hinge or top roller carrier at a time. See the figure below for the proper position of the numbered hinges and the top roller fixtures. Do NOT unlock or attempt to raise the door until ALL hinges, top roller fixtures, and rollers are installed.
    It may be necessary to change the position of the top roller fixture to assure a tight fit of the top section. Slide the top roller fixture up or down and drill new bolt holes in order to adjust the top section against the jambs.
    Do not stand under the door at any time.
    See our other items
    Residential Top Roller Bracket
    Adjustable residential top bracket made in the USA out of galvanized steel. For use on the top inside corners, right and left sides, of the top section of any type residential overhead garage door. This bracket moves the top section either forward or back to align the top section to fit tight against the door jam. Takes a standard 2" or 3" roller.
    Includes:
    Bracket
    Hardware
    Features:
    Top quality galvanized steel.
    Made in U.S.A.
    Assorted bracket hole combinations.
    Adjustable (3/8" to 7/8" and 1-7/8" to 3-3/16") top roller carrying fixture.
    Specifications:
    3 1/2" long
    2 1/2" wide.
    12 Gauge Galvanized Steel
    Compatibility
    Compatible with:
    All residential overhead garage doors
    Instructions
    Instructions for replacing: Hinge, Roller, Top Roller Fixture
    Lower door to "closed" or "down" position and lock.
    Remove one hinge, one top roller fixture or roller (except bottom roller) and replace, inserting the roller in the track before fastening the hinge or top roller fixture. Replace ONLY ONE hinge or top roller carrier at a time. See the figure below for the proper position of the numbered hinges and the top roller fixtures. Do NOT unlock or attempt to raise the door until ALL hinges, top roller fixtures, and rollers are installed.
    It may be necessary to change the position of the top roller fixture to assure a tight fit of the top section. Slide the top roller fixture up or down and drill new bolt holes in order to adjust the top section against the jambs.
    Do not stand under the door at any time.